E-Aqua Model | Material Safety Data Sheet (EN)
Material Safety Data Sheet of E-Aqua Model, a DLP and cDLM 3D printing dental material.
Read MoreE-Aqua Model
Desktop Health™
E-Aqua Model
Eco-friendly material for easy cleanup of dental models
E-Aqua Model printing material for DLP and cDLM 3D printers is the perfect choice for high-accuracy orthodontic models. It allows an environmentally friendly cleaning process by using only water, and no alcohol.
Lower shrinkage & curling of dental models
E-Aqua Model has added strength and stability due to its high green strength during the build which means lower shrinkage and curling than similar products. The low viscosity of the liquid material allows for quick and easy cleanup of the models without the need to use alcohol. It can be cleaned with a simple water bath, eliminating fumes and hazardous waste.
Applications
Crown and Bridge Models
Orthodontic Models
Implant Models
Clear Aligner Models
Diagnostic Models
Powered by Vat-Photopolymerisation
Speak to an expert to understand why DLP 3D printing processes and technologies
are a game-changer for the dental industry
Material Properties
Tensile Strength |
Tensile Strength55 MPa |
Elongation at Break |
Elongation at Break5.5% |
Tensile Modulus |
Tensile Modulus2200 MPa |
Flexural Strength |
Flexural Strength90 MPa |
Flexural Modulus |
Flexural Modulus2540 MPa |
Impact |
Impact25 J/m |
Heat Deflection Temperature (HDT) |
Heat Deflection Temperature (HDT)60.5°C at 1.82 MPa |
D Hardness |
D Hardness83 |
Viscosity |
Viscosity150 cP at 30°C |
Related Resources
E-Aqua Model | Technical Data Sheet
Technical Data Sheet of E-Aqua Model, a 3D printing material for the production of high-accuracy orthodontic models.
Read More