Einstein Series

Desktop Health™

Einstein Series

Fit for a Genius

The Einstein series is set to deliver the key features in DLP 3D printing: accuracy, speed and versatility. The proprietory NanoFit385 nm technology ensures stunning clarity, perfect fit and an impressively natural-looking finish. Fabricate faster and more thanks to Einstein's HyperPrint™ software and materials versatility, from dentures to models and everything in between.

Einstein.

From Fit to Finish,
In the Clinic or the Lab

Designed for superior accuracy, speed, and versatility, the Einstein 3D Printer series from Desktop Health will enable your dental lab or clinic to digitize a broad range of applications in-house. Powered by NanoFit 385, up to 4K resolution, and HyperPrint™ software, the Einstein series delivers high-fidelity results at breakneck speeds. 

 

Einstein models

From clinicians to high-production dental labs, the Einstein series has a perfect fit for your business. 

DH_Einstein_Dental 3D printer

Einstein™

by Desktop Health®

The Einstein™ dental 3D printer is designed for chairside printing and general dentists.

Specs
  • HyperPrint™ – Available
  • NanoFit 385 – Available
  • Wavelength: 385 nm
  • Chip: 2k
  • Build Envelope 7.48″ x 4.21″ x 4″
  • XY Native Resolution: 99 μm
  • Enhanced XY Resolution (Pixel Tuning): 65 μm
  • Dynamic Layer Thickness (Z Resolution): 25-50-75-100-150 μm
Technology/Process
  • DLP Technology

DH_EinsteinPro_3D printer

Einstein™ PRO

by Desktop Health®

Einstein PRO covers the 3D printing needs of small labs and specialists.

Specs
  • HyperPrint™ – Available
  • NanoFit 385 – Available
  • Wavelength: 385 nm
  • Chip: 2k
  • Build Envelope: 7.09″ x 3.98″ x 6″
  • XY Native Resolution: 95 μm
  • Enhanced XY Resolution (Pixel Tuning): 63 μm
  • Dynamic Layer Thickness (Z Resolution): 25-50-75-100-150 μm
Technology/Process
  • cDLM Tehcnology (Continuous Direct Light Manufacturing)

DH_EinsteinProXL_3D printer

Einstein™ PRO XL

by Desktop Health®

Einstein PRO XL is dedicated to high production dental labs.

Specs
  • HyperPrint™ – Available
  • NanoFit 385 – Available
  • Wavelength: 385 nm
  • Chip: 4k
  • Build Envelope: 9.8″ x 5.5″ x 6.5″
  • XY Native Resolution: 92 μm
  • Enhanced XY Resolution (Pixel Tuning): 45 μm
  • Dynamic Layer Thickness (Z Resolution): 25-50-75-100-150 μm
Technology/Process
  • DLP Technology

Key Features

Build envelope icon

NanoFit385 nm

385 nm wavelength is the closest that you can get to natural light

Vacuum Proto3000 icon

HyperPrint™ Software

Powered by AI, HyperPrint automates file preparation and support structures

exocad dentalcad full denture module icon

Material Versatility

A rapidly growing dental portfolio of >60 validated materials including FDA and Health Canada cleared resins

Proto3000_microns icon

Z Resolution

Dynamic Layer Thickness
(25-50-75-100-150 microns)

Continuous_Manufacturing Proto3000 icon

cDLM Technology*

Continuous Digital Light Manufacturing allows continuous printing on the X-Y-Z axis (no delay from lifting each layer).
*For the PRO models

Proto3000_ Faster 3d printing icon

50% Faster 3D printing

Einstein series allows for maximization of 3D printing capabilities

Powered by Vat-Photopolymerisation

Speak to an expert to understand why DLP 3D printing processes and technologies
are a game-changer for the dental industry

REQUEST A SAMPLE PART

Transform your workflow from fit to finish with Einstein

HyperPrint™

 

In order to deliver a speed boost of up to 50%, the Einstein printers come with HyperPrint™, a productivity enhancement that harnesses the power of heat and a closed-loop software upgrade. 

Hyper-Print-A-Type

NanoFit385 nm

The Einstein 3D printers run at a wavelength of 385 nm and that is the closest you can get to natural light. Thanks to the NanoFit385 technology, dental applications such as implants are yielded with stunning clarity, accuracy and perfect fit.

 

Higher dental prosthetic throughput

 

From dentures to models and everything in between, the Einstein printers are compatible with a wide range of materials, therefore, maximizing the productivity of your dental lab or office. 

 

Flexcera Ultra Smile+ Resin application

Permanent dental prosthetics

Use the newly released Flexcera™ Smile Ultra + on the Einstein 3D printers and you can produce permanent dental prosthetics. This hybrid nanoceramic resin from Desktop Health® has a 510(k) Class 2 medical device FDA clearance.

 

 

The Perfect Fit - Flexcera Ultra smile+

Discover the Benefits of Digital Dentistry

Speak to an expert to understand how your lab or clinic can achieve better profitability and efficiency with a seamless digital workflow
powered by industry-leading 3D technologies.

Speak to An Expert

An End-to-End Dental 3D Printing Workflow

end to end dental 3d printing workflow image

intraoral scanning to 3D printing

Digital Data

Start your workflow with a digital impression using one of the 25 compatible dental scanners (including the Medit i700) and exocad integration

dental 3d printing preparation software

Prepare

Automate your file preparation workflow with one-click Hyperprint. Sit back, and let the software do the work

dental 3d printer workflow

3D Print

3D print your dental models with industry-leading speed, accuracy, and one of the widest material portfolios available

post processing workflow

Post-Process

Clean and cure your 3D printed models to achieve final part strength

Desktop Health_Einstein_Build Tray Bite Splints

Trusted by Dental Industry Leaders

desktop health partners

Materials

E-Dent-Monolithic-Dentures-for-smile ultra plus

Flexcera Smile Ultra+

FDA-cleared hybrid nanoceramic 3D printing resin

Flexcera Smile Ultra+ is a hybrid nanoceramic resin FDA 510(k) Class 2 cleared for permanent and temporary dental restorations with lifelike lustre and translucency.

Full Description

Dental applications from Flexcera Smile Ultra+ may only be manufactured by dental technicians and must be inspected by authorized practitioners, such as dentists before they are released to the patients.

Specs
  • 3x more resistant to fracture
  • 2x more resistant to moisture
  • Available in 6 shades
    • Bleach
    • A1
    • A2
    • A3
    • A3.5
    • B1
Application
  • Teeth for dentures
  • Crowns
  • Inlays
  • Onlays
  • Bridges
  • Veneers
  • Monolithic full and partial dentures
Technology/Process
  • DLP Technology
  • cDLM Technology

flexcera-smile-desktop-health

Flexcera Smile

Premium Denture Teeth 3D Printing Material

Flexcera™ Smile is a light-curable resin for the fabrication of high-impact artificial teeth with variable translucency for dentures.

Specs
  • Viscosity @ 30°C 660 cP
  • Shore D: 89-90
  • Izod Notched Impact: 20 J/m
  • Heat Deflection Temperature: 58°C @ 1.82 MPa
  • Young’s Modulus:
    • 1340 MPa (dry material)
    • 1330 MPa (after immersion in water 2 days at 37°C)
  • Ultimate Strength:
    • 67.5 MPa (dry material)
    • 68.9 MPa (after immersion in water 2 days at 37°C)
  • Strain at Break:
    • 16% (dry material)
    • 14% (after immersion in water 2 days at 37°C)
  • Ultimate Flexural Strength:
    • 136 MPa (dry material)
    • 125 MPa (after immersion in water 2 days at 37°C)
  • Flexural Modulus:
    • 3660 MPa (dry material)
    • 3300 MPa (after immersion in water 2 days at 37°C)
Application
  • Digital Denture Teeth
Technology/Process

Continuous Digital Light Processing™ compatible with ETEC and Desktop Health 3D printers.


flexcera-base-desktop health

Flexcera Base

Premium Denture Base 3D Printing Material

Flexcera Base™ is a light-curable resin for the production of high-impact and removable denture bases.

Specs
  • Viscosity @ 30°C: 535 cP
  • Shore D: 81
  • Izod Notched Impact: 29.6 J/m
  • Young’s Modulus:
    • 780 MPa (dry material)
    • 902 MPa (after immersion in water 2 days at 37°C)
  • Ultimate Flexural Strength:
    • 90 MPa (dry material)
    • 81 MPa
    • (after immersion in water 2 days at 37°C)
Application
  • Removable denture bases
  • Functional dentures
Technology/Process

Continuous Digital Light Processing™ compatible with ETEC and Desktop Health 3D printers.


e-aquamodel-desktop health

E-Aqua Model

Eco-friendly material for orthodontic models

E-Aqua Model photopolymer is best-recommended for high-accuracy orthodontic models. This material allows an eco-friendly cleaning process by using just water, and no alcohol.

Full Description

A high green strength gives E-Aqua Model added strength and stability during the build, resulting in lower shrinkage and curling than similar products. The low viscosity of the liquid material allows for quick and easy cleanup of the models without the need to use alcohol.

Specs
  • Tensile Strength: 55 MPa
  • Elongation at Break: 5.5%
  • Tensile Modulus: 2200 MPa
  • Flexural Strength: 90 MPa
  • Flexural Modulus: 2540 MPa
  • Impact: 25 J/m
  • HDT(Heat Deflection Temperature): 60.5°C at 1.82 MPa
  • D Hardness 83
  • Viscosity: 150 cP at 30°C
Application
  • Crown and bridge models
  • Orthodontic models
  • Implant models
  • Clear aligner models
  • Diagnostic models
Technology/Process
  • Continuous Digital Light Processing™ & Digital Light Processing technologies

e-partial-desktop health

E-Partial

Dental model making and clear aligner production

E-Partial is an accurate material for dental model making and clear aligner production. It maintains flexural strength to ensure clasp flex without breakage.

Full Description

E-Partial is a castable material developed to deliver delicate partial frameworks with thin features and some flexibility. Its stiffness allows for the production of a very hard retention grid and super-tight thin clasps to deliver a metal partial with the perfect fit every time.

Specs
  • Tensile Strength: 57 MPa
  • Elongation at Break: 3.6%
  • Flexural Strength: 129 MPa
  • Flexural Modulus: 3155 MPa
  • HDT (Heat Deflection Temperature) – no heat treatment necessary: 130°C at 9,455 MPa, 78°C at 1.82 MPa
  • Shore D 89
  • Specific: Gravity 1.1 – 1.11 g/cm3
  • Viscosity: 760 cP at 25°C
Application
  • Crown and bridge models
  • Orthodontic models
  • Implant models
  • Clear aligner models
  • Diagnostic models
Technology/Process

press-e-cast-desktop health

Press E-Cast

Material: Press E-Cast

Press-E-Cast is a wax-filled photopolymer material designed for producing wax copings and crowns with highly detailed anatomy and crisp features. It can be pressed into full-contour ceramics.

Full Description

With Press E-Cast it is possible to produce a perfectly fitting multiple unit bridge up to 16 units due to its very low thermal expansion during burn-out. This wax-filled photopolymer is a material for the production of full anatomical crowns and bridges with extreme dimensional accuracy in X, Y and Z, and exceptional surface finish. The burnout for parts 3D printed in Press-E-Cast is rapid, clean and ash-free, resulting in accurate, quality castings.

Specs
  • Tensile Strength: 56 MPa
  • Elongation at Break 3.5%
  • Flexural Strength 115 MPa
  • Flexural Modulus 3350 MPa
  • HDT (Heat Deflection Temperature) / No heat treatment necessary: 150°C (284°F
Application
  • Crown and bridge wax ups
  • Pressing and casting full contour crowns
  • Casting copings and subtractures
  • Casting removable partial denture frameworks
Technology/Process

Continuous Digital Light Processing™ used with EnvisionTEC™ 3D printers.


e-guard-desktop health

E-Guard

Biocompatible transparent resin

E-Guard is a biocompatible transparent material for the production of accurate orthodontic bite splints and night guards.

Full Description

It is a clear material, allowing for maximum visibility. High-resolution 3D printing allows for a precise fit. The results produced by combining E-Guard with EnvisionTEC technology are superior to traditional methods of manufacturing bite guards and night guards.

Specs
  • Ultimate Flexural Strength: 79-85 MPa
  • Flexural Modulus: 2050 – 2130 MPa
  • Water Sorption, µm/mm3: 30 – 32
  • Water Solubility, µm/mm3: 0.5
  • Viscosity @ 30°C, cP: 230 – 330
  • Cytotoxicity Passed: ISO 10993-5
  • Irritation and Skin Sensitization: Passed ISO 10993-10
Application
  • Nightguards
  • Occlusal guards
  • Snoring appliances
  • Bite splint
  • Bite planes
Technology/Process

Continuous Digital Light Processing™ used with EnvisionTEC™ 3D printers.


e-guide-desktop health

E-Guide

Biocompatible certified Class I material

E-Guide is an accurate material for dental modelmaking and clear aligner production. With E-Guide, drill guides can be produced at lower costs.

Full Description

This resin is a biocompatible certified Class I material, developed for the production of high precision surgical drill guides for use in implant surgery. The results produced by combining E-Guide with EnvisionTEC technology are superior to traditional methods of manufacturing implant placement guides.

Specs
  • Ultimate Flexural Strength: 79 – 85 MPa
  • Flexural Modulus: 2059 – 2030 MPa
  • Water Sorption: 30 – 32 µm/mm3
  • Water Solubility: 0.5 µm/mm3
  • Viscosity @ 30°C: 230 – 330 cP
  • Cytotoxicity: Passed ISO 10993-5
  • Irritation and skin sensitization: Passed ISO 10993-10
Application
  • Surgical guides
  • Pilot drill guides
  • Drilling templates
  • Device sizing templates
Technology/Process

Continuous Digital Light Processing™ used with EnvisionTEC™ 3D printers.


e-model-beige-desktop health

E-Model Beige

Material: E-Model Beige

E-Model Beige printing material for DLP and cDLM 3D printers is the perfect choice for orthodontic models for thermoforming aligners over.

Full Description

A high green strength gives E-Model Beige added strength and stability during the build, resulting in lower shrinkage and curling than similar products. The low viscosity of the liquid material allows for quick and easy cleanup of the models. E-Model Beige produces detailed models, with exceptional surface finish, for precise orthodontic treatment plans.

Specs
  • Tensile Strength: 55 MPa
  • Elongation at Break: 5.5%
  • Tensile Modulus: 2200 MPa
  • Flexural Strength: 90 MPa
  • Flexural Modulus: 2540 MPa
  • Impact: 25J/m
  • Heat Deflection Temperature (HDT): 60.5°C at 1.82 MPa
  • D Hardness: 83
  • Viscosity: 150 cP at 30°C
Application
  • Crown and bridge models
  • Orthodontic models
  • Implant models
  • Clear aligner models
  • Diagnostic models
Technology/Process

Continuous Digital Light Processing™ & Digital Light Processing used with EnvisionTEC™ 3D printers.


e-model-beige-desktop health

E-Model Beige

Material: E-Model Beige

E-Model Beige printing material for DLP and cDLM 3D printers is the perfect choice for orthodontic models for thermoforming aligners over.

Full Description

A high green strength gives E-Model Beige added strength and stability during the build, resulting in lower shrinkage and curling than similar products. The low viscosity of the liquid material allows for quick and easy cleanup of the models.

Specs
  • Tensile Strength: 55 MPa
  • Elongation at Break: 5.5%
  • Tensile Modulus: 2200 MPa
  • Flexural Strength: 90 MPa
  • Flexural Modulus: 2540 MPa
  • Impact: 25 J/m
  • HDT(Heat Deflection Temperature): 60.5°C at 1.82 MPa
  • D Hardness 83
  • Viscosity: 150 cP at 30°C
Application
  • Crown and bridge models
  • Orthodontic models
  • Implant models
  • Clear aligner models
  • Diagnostic models
Technology/Process

Continuous Digital Light Processing™ & Digital Light Processing used with EnvisionTEC™ 3D printers.


e-model HS-desktop health

E-Model HS

Material: E-Model HS

E-Model HS material produces models with high accuracy and an exceptional surface finish for a perfect fit.

Full Description

E-Model HS is ideal for orthodontic applications when using a thermoforming technique to produce clear aligners. With the ability to print up to 120 mm/hour, this material is the fastest printing resin on the market today.

Specs
  • Tensile Strength: 48.6 MPa
  • Elongation at Break: 7%
  • Flexural Strength: 2100 MPa
  • Hardness: Shore D 83
  • Resin Specific Gravity: 1.10 – 1.12 g/cm3
  • Print Speed: Up to 120 mm/hour
Application
  • Thermoforming models
  • Clear aligner models
  • Orthodontic appliance models
  • Diagnostic models
Technology/Process

Continuous Digital Light Processing™ used with EnvisionTEC™ 3D printers.


e-model-light-dlp-DESKTOP HEALTH

E-Model Light DLP

Material: E-Model Light DLP

E-Model Light DLP printing material is the perfect choice for a wide variety of high-accuracy dental modeling needs with exceptional surface needs.

Full Description

A high green strength gives E-Model added strength and stability during the build, resulting in lower shrinkage and curling than similar products. The low viscosity of the liquid material allows for quick and easy cleanup of the models.

Specs
  • Tensile Strength: 55 MPa
  • Elongation at Break: 5.5%
  • Tensile Modulus: 2200 MPa
  • Flexural Strength: 90 MPa
  • Flexural Modulus: 2540 MPa
  • Impact: 25 J/m
  • HDT (Heat Deflection Temperature): 60.5°C at 1.82 MPa
  • D Hardness 83
  • Viscosity: 150 cP at 30°C
  • Available colours: Natural, Light, Peach, Black, Beige
Application
  • Crown and bridge models
  • Orthodontic models
  • Implant models
  • Clear aligner models
  • Diagnostic models
Technology/Process

Continuous Digital Light Processing™ used with EnvisionTEC™ 3D printers.


e-orthoshape-desktop health

E-Orthoshape

Material: Grey ABS-like material

E-OrthoShape is a grey ABS-like material that prints in 100 micron layers that produces extremely detailed models, with exceptional surface finish.

Full Description

It is recommended for the affordable volume production of models on which to produce clear thermoformed aligners by orthodontic professionals.

Specs
  • Tensile Strength: 65 MPa
  • Tensile Modulus: 1772 MPa
  • Elongation at Break: 6.6%
  • Flexural Strength: 108 MPa
  • Flexural Modulus: 2543 MPa
  • Viscosity: 765 cP at 30°C
  • Colour: Gray
Application
  • Crown and bridge models
  • Orthodontic models
  • Implant models
  • Clear aligner models
  • Diagnostic models
Technology/Process

Continuous Digital Light Processing™ & Digital Light Processing used with EnvisionTEC™ 3D printers.


e-denstone desktop health

E-Denstone

Material: E-Denstone

E-Denstone is a resin for the rapid production of highly accurate, scannable dental models.

Full Description

With a look and feel similar to traditional gypsum models, E-Denstone delivers a matte finish, which assists in accurate scanning for verification purposes. This material allows the user to die trim, margin mark with a red pencil and hand wax to the die without concern over layer lines. Die paint sticks to the dies just like plaster and won’t peel off.

Specs
  • Tensile Strength: 56 MPa
  • Elongation at Break: 3.5%
  • Flexural Strength: 115 MPa
  • Flexural Modulus: 3350 MPa
  • HDT (Heat Deflection Temperature), No heat treatment necessary: 140°C (284°F)
Application
  • Crown and bridges models
  • Mounting casts
  • Counter models
  • Casting partials
  • Denture repairs
Technology/Process

Continuous Digital Light Processing™ & Digital Light Processing used with EnvisionTEC™ 3D printers.


 Einstein 3D printer

Technical front & back overview

 

Einstein - technical view - desktop health

Einstein - technical view - desktop health (back_